Operators must first learn to operate correctly and safely in order to give full play to the maximum efficiency of the equipment. The following summarizes how to correctly operate the machine, prevent and eliminate safety hazards.
To operate the machine, the most important thing is to strictly abide by the safe operation system of the equipment
1. Long hair, high heels and shoes with slippery soles are not allowed.
2. Button the work clothes tightly, and do not put hard objects such as keys, tools and pens in the pocket.
3. Tools shall not be placed on the pedal of the machine at will, and the oil stain shall be cleaned in time.
4. When adjusting the machine midway, it is necessary to stop the machine and lock the safety device; two or more people should cooperate and take care of each other to prevent accidental injury to others.
5. Keep gasoline, alcohol, reducing agent and other flammable materials properly, and do not store them near electrical appliances and high temperature areas.
6. When taking over the shift, you should check the record first, and start the machine after one circle. When handing over the shift, you should fill in the machine condition record.
Operation of the printing machine to be extra careful, thinking to a high degree of concentration, accurate judgment, careful, clean action, leaving no hidden danger. On the contrary, if the operator is listless and absent-minded, it is very easy to bury safety risks.
The operators should master the correct safe operation methods and put an end to bad operation habits, such as throwing out the used tools and not putting them in the correct position; often extending their hands into the paper receiving pile to press paper; while operating, chatting, etc. These situations may bring security risks.
Four color offset press safety accidents occurred a lot, many are caused by improper operation. Personal injury, machine damage, enterprise economic benefits are not guaranteed. As long as through the correct management and operation, improve the safety awareness and technical level of operators, can avoid many accidents.